Hva betyr feilkode CEM-8F09?

Diagnose og feilkodedefinisjon for CEM-8F09 (Volvo S60 (2001–2009), Volvo S80 (1999–2006), Volvo V70 (2000–2008)). Bestill reparasjon hos OBD Tuning.

VOLVO

CEM-8F09 - Engine control module (ECM). Signal too high

System

Sentral elektronikk (CEM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

5 modeller

S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

Vis modeller per årsmodell og motor (5)

Hva betyr feilkoden?

Although the code is named too high signal, the fault lies in a broken signal wire for the wake-up line to the ECM. The central electronic module (CEM) controls both that signal and the hazard flashers from the same driver circuit. The engine cranks but does not start.

Mulige årsaker

Open circuit in the signal wire for the wake-up signal to the ECM

Hva du kan gjøre

1With diagnostic equipment, read the status of the wake-up signal to the ECM and check that it changes when the ignition position is switched from I to II
2Check that the connectors at the CEM and the engine control module are clean and firmly fitted, with no loose connections
3With the ignition off, use a multimeter to check that the signal wire is unbroken
4If the engine does not start, have a workshop check the signal wire and the modules

Symptomer du kan merke1

The engine cranks but does not start

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.