VOLVO
CEM-8FD0 - Relay, auxiliary lamp. Signal too high
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (5)
Hva betyr feilkoden?
The CEM supplies voltage to the extra lights and has registered a signal that is too high at the auxiliary lamp relay's control input. The fault shows when the relay is activated, and then the auxiliary lights do not work. The cause may be a signal cable shorted to battery voltage.
Mulige årsaker
- Signal cable to the auxiliary lights relay shorted to battery voltage
Hva du kan gjøre
- 1Test the auxiliary lights with the ignition on: if they do not light the fault is permanent, and if they light it has occurred before
- 2Clear the code and check whether it returns while the auxiliary lights are activated
- 3With the ignition off, use a multimeter to check that the signal cable to the auxiliary lights relay has no contact with battery voltage
- 4Look for chafing on the cable where it may have touched battery voltage
- 5If the fault returns, have a workshop check the cable and replace the auxiliary lights relay if needed
Symptomer du kan merke1
- The auxiliary lights do not work
Hva feilen kan påvirke1
- After the fault has been present for a while, the output is switched off permanently until the code is cleared
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.