VOLVO
CEM-B100715 - Gear Lever Illumination. General Electrical Failures. Circuit short to battery or open
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerV40 (2013–), V40 Cross Country (2013–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The voltage feeding the gear selector lighting is excessive, or the circuit is broken. The fault code is stored when the central electronic module (CEM) detects this, and the gear lever lighting does not work.
Mulige årsaker
- Supply cable shorted to voltage
- Supply cable has an open circuit
Hva du kan gjøre
- 1Check that the relevant fuses are intact
- 2Switch the ignition off, wait a moment and switch it on again to see whether the lighting works
- 3With the ignition on, check the cable for chafing, wear and loose connections, especially where it might have touched a live wire
- 4With the ignition off, use a multimeter to check whether the supply cable has voltage or is broken
- 5Remedy the fault and clear the fault code. If it remains, have a workshop check the control module
Symptomer du kan merke1
- Gear selector lighting does not work
Hva feilen kan påvirke1
- The output is switched off for the rest of the drive cycle and only starts again after an ignition cycle
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.