VOLVO
CEM-B102581 - Transponder. Bus Signal / Message Failures. Invalid serial data received
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
When the key is read at start-up, the ignition lock control unit (SCU) hands the key data over to the central electronic module (CEM). The fault code is stored when the key ID cannot be approved or the information cannot be interpreted. The engine then does not start.
Mulige årsaker
- The key ID cannot be validated
- The information from the remote key cannot be interpreted correctly
Hva du kan gjøre
- 1Try a different key that belongs to the car. If it works, a workshop can add the key that does not work
- 2If none of the keys work, the ignition lock control unit or the antenna unit is probably faulty, and a workshop needs to replace it
- 3Check that the key is not damaged, for example by moisture or a knock
- 4Clear the fault code and road test to see whether it returns
Symptomer du kan merke4
- The starter motor does not turn over
- A message appears in the information display
- The engine does not start, or starts only unreliably
- The immobiliser warning light does not show the correct status
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.