VOLVO
CEM-B10A215 - Crash Input. General Electrical Failures. Circuit short to battery or open
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The CEM monitors the collision input from the supplemental restraint system (SRS). The fault shows that the signal is too high, which can be caused by the signal wire being shorted to battery voltage or by an open circuit in it.
Mulige årsaker
- The signal wire is shorted to battery voltage
- Open circuit in the signal wire
Hva du kan gjøre
- 1Read off and note the code, but do not clear it until the restraint system has been checked
- 2Check that the fuses are intact
- 3Look for chafed, pinched or loose wires to the restraint system, but do not work on the wiring yourself
- 4Do not work on the airbag system yourself: have a workshop check the wiring and the control module
- 5Do not drive the car with a restraint system warning until a workshop has checked it
Symptomer du kan merke1
- Message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.