VOLVO
CEM-B10AD06 - Rain sensor. General Failure Information. Algorithm Based Failures
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerV40 (2013–), V40 Cross Country (2013–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The CEM communicates with the rain sensor. The fault shows that the rain sensor has not been able to adapt itself automatically to the windscreen, which can be caused by a loose mounting or damaged glass.
Mulige årsaker
- Damaged rain sensor
- The rain sensor is not firmly attached to the glass
- Crack in the glass near the rain sensor
- Stone chip in the glass near the rain sensor
Hva du kan gjøre
- 1Read off and note the code and check whether it returns when you switch the rain sensor on
- 2Check that the rain sensor is firmly attached to the glass
- 3Clean the glass near the rain sensor and look for cracks or stone chips
- 4Check that the rain sensor cushion is intact and in place
- 5If the fault remains, have a workshop check or replace the rain sensor
Symptomer du kan merke1
- The automatic windscreen wipers do not work
Hva feilen kan påvirke1
- If the fault occurs a while after the rain sensor is activated, the wipers go to top speed
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.