VOLVO
CEM-B10B000 - Target Authenification Fault. General Failure Information. No sub type information
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerV40 (2013–), V40 Cross Country (2013–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
At ignition, the car checks that matching immobiliser codes are stored in the engine control module (ECM) and in the CEM. The fault shows that the ECM could not confirm that the two codes agree, so engine start is blocked.
Mulige årsaker
- The immobiliser code stored in the ECM is wrong
- The immobiliser code stored in the CEM is wrong
Hva du kan gjøre
- 1Read off and note the code and check whether it returns when the ignition is switched on
- 2Check whether any control module has recently been replaced, since a new module may need new software and codes
- 3Try another key for the car, if you have one, and see whether the engine starts
- 4Have a workshop check the immobiliser codes and download software to the correct control module if needed
Symptomer du kan merke3
- The engine does not start or does not turn over
- No clicking sound when trying to start
- Text message and warning symbol in the display
Hva feilen kan påvirke1
- Engine start is not permitted
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.