Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    CEM-B10BB01
    VOLVO

    CEM-B10BB01 - Front/Rear Axle Level Sensor. General Failure Information. General electrical failure

    System

    Sentral elektronikk (CEM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    7 modeller

    S60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (7)
    • Volvo S60 (2011–)2011–2015
    • Volvo S80 (2007–)2010, 2012–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2010, 2012–2015
    • Volvo XC60 (2009–)2010, 2012–2015
    • Volvo XC70 (2008–)2010, 2012–2015

    Hva betyr feilkoden?

    The central electronic module (CEM) supplies the front and rear level sensors, which measure the height of the car and are used to adjust the headlights. The fault shows that the supply to the sensors is shorted to voltage or ground. The sensors share a supply inside the CEM, so the fault can affect both.

    Mulige årsaker

    • The supply to the front level sensor is shorted to voltage or ground
    • The supply to the rear level sensor is shorted to voltage or ground

    Hva du kan gjøre

    1. 1Read off and note the code, clear it and check whether it returns with the engine running
    2. 2Check that the fuses for the headlight level control are intact
    3. 3Check that the connectors at the front and rear level sensors are fully engaged and not corroded
    4. 4Use a multimeter (ignition off, connectors unplugged) to check that the supply wires have no connection to ground or battery positive
    5. 5If you have a diagnostic tool, read the sensor values in live data and check that they change when the front and rear of the car are pressed down and released
    6. 6If the fault remains, have a workshop check the sensors and the wiring

    Symptomer du kan merke4

    • Headlight side adjustment does not follow the steering wheel
    • Headlight height adjustment does not work or is set wrongly
    • Text message and warning symbol in the display
    • Automatic high beam dimming (AHB) does not work

    Hva feilen kan påvirke2

    • The headlight beam stays at a fixed level
    • Side adjustment stays fixed straight ahead

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.