Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    CEM-B10F511
    VOLVO

    CEM-B10F511 - Left rear position light. General Electrical Failures. Circuit short to ground

    System

    Sentral elektronikk (CEM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    9 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (9)
    • Volvo S60 (2011–)2011–2015
    • Volvo S80 (2007–)2007–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2008–2015
    • Volvo XC60 (2009–)2009–2015
    • Volvo XC70 (2008–)2008–2015

    Hva betyr feilkoden?

    The CEM feeds the left rear position light directly from an output. The code is stored when the signal from the output is too low, which is caused by the supply cable being short-circuited to ground. The left rear tail light then does not work.

    Mulige årsaker

    • The supply cable is short-circuited to ground

    Hva du kan gjøre

    1. 1Check that the relevant fuses are intact. Their locations are in the owner's manual or on the fuse box cover
    2. 2Check that the lamp is secure and that the connectors in the tail light are clean and dry
    3. 3Look for chafing and pinch damage on the supply cable to the left rear position light
    4. 4Use a multimeter to check that the supply cable has no contact with ground (the body)
    5. 5If you have a diagnostic tool: activate the left rear position light and check that it lights
    6. 6If the fault returns, have a workshop with diagnostic equipment check the control module output and the wiring

    Symptomer du kan merke3

    • Left rear tail light does not work
    • Yellow warning symbol and text message in the display
    • The bulb failure warning in the instruments comes on or behaves abnormally

    Hva feilen kan påvirke3

    • The output switches off in the driving cycle in which the fault is detected
    • If the fault remains, the output switches off permanently after 100 driving cycles
    • Clearing the fault codes and starting a new driving cycle resets the output

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.