VOLVO
CEM-B1C5519 - Horn Relay. General Electrical Failures. Circuit current above threshold
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerV40 (2013–), V40 Cross Country (2013–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The CEM controls the horn relay. The fault is stored when the current in the relay drive circuit is too high, which is caused by the drive circuit being short-circuited to voltage. It is detected when the horn is activated.
Mulige årsaker
- The relay drive circuit is short-circuited to voltage
Hva du kan gjøre
- 1Check that the fuse for the horn is intact
- 2Press the horn to see whether it sounds, then clear the fault code and road test
- 3Check the wire from the CEM to the horn relay for chafing and pinch damage
- 4Use a multimeter to check that the wire is not short-circuited to battery voltage with the connectors disconnected
- 5If the fault returns, have a workshop with diagnostic equipment check the relay and the CEM
Symptomer du kan merke1
- The horn does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.