VOLVO
CEM-B1C9013 - Auxillary Driving Lamps Relay. General Electrical Failures. Circuit open
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The central electronic module (CEM) switches the auxiliary lights on through a control signal. The code is linked to an open circuit in the control signal wire, and The fault is therefore usually noticed first when you try to switch the auxiliary lights on.
Mulige årsaker
- Open circuit on the control signal wire
Hva du kan gjøre
- 1Read and clear the code, then switch on the auxiliary lights and see whether they work
- 2Check that the fuse for the auxiliary lights is intact
- 3Look for loose, corroded or broken connectors on the control signal wire to the auxiliary light relay
- 4Use a multimeter to check that the control signal wire is continuous between its two ends
- 5If the wire is intact, have a workshop with diagnostic equipment check the relay and the control signal from the module
Symptomer du kan merke1
- The auxiliary lights do not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.