Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    CEM-C111A11
    VOLVO

    CEM-C111A11 - Right Stop Lamp. General Electrical Failures. Circuit short to ground

    System

    Sentral elektronikk (CEM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    9 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (9)
    • Volvo S60 (2011–)2011–2015
    • Volvo S80 (2007–)2010–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2010–2015
    • Volvo XC60 (2009–)2010–2015
    • Volvo XC70 (2008–)2010–2015

    Hva betyr feilkoden?

    The central electronic module (CEM) supplies the right brake light directly from an output. The code is set when the signal from the output is too low, which can be caused by poor contact in the connections or a signal wire shorted to ground.

    Mulige årsaker

    • Contact resistance, oxidation or play in the connections
    • The signal wire is shorted to ground

    Hva du kan gjøre

    1. 1Read and clear the code, then press the brake pedal and see whether the right brake light comes on
    2. 2Check that the bulb in the right brake light is intact and sits correctly in its holder
    3. 3Check the brake light fuse
    4. 4Check the connections to the right brake light for oxidation and play
    5. 5Use a multimeter to check that the signal wire has no contact with ground (the bodywork)
    6. 6If the wire is intact, have a workshop with diagnostic equipment check the module output

    Symptomer du kan merke3

    • The right brake light does not work
    • Yellow warning symbol and text message in the display
    • The bulb failure warning in the instruments comes on or behaves abnormally

    Hva feilen kan påvirke3

    • The function switches off during the driving cycle in which the fault is detected
    • After repeated driving cycles with the fault, the function is switched off permanently
    • Clearing the fault codes and starting a new driving cycle resets the output

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.