Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    CEM-C111B11
    VOLVO

    CEM-C111B11 - Left Stop Lamp. General Electrical Failures. Circuit short to ground

    System

    Sentral elektronikk (CEM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    9 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (9)
    • Volvo S60 (2011–)2011–2015
    • Volvo S80 (2007–)2010–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2010–2015
    • Volvo XC60 (2009–)2010–2015
    • Volvo XC70 (2008–)2010–2015

    Hva betyr feilkoden?

    The central electronic module (CEM) feeds the left brake light directly from an output. On V70 and XC70 one output feeds both brake lights, so both can be affected. The code is set when the signal is too low, which can be caused by poor contact or a short to ground.

    Mulige årsaker

    • Contact resistance, oxidation or play in the connections
    • The signal wire is shorted to ground

    Hva du kan gjøre

    1. 1Read and clear the code, then press the brake pedal and see whether the left brake light comes on
    2. 2Check that the bulb in the left brake light is intact
    3. 3Check the brake light fuse; on the V70 and XC70 the right brake light can also be affected, so check it too
    4. 4Check the connections to the left brake light for oxidation and play
    5. 5Use a multimeter to check that the signal wire has no contact with ground (the bodywork); otherwise have a workshop check the module output

    Symptomer du kan merke3

    • The left brake light does not work
    • Yellow warning symbol and text message in the display
    • The bulb failure warning in the instruments comes on or behaves abnormally

    Hva feilen kan påvirke3

    • The function switches off during the driving cycle in which the fault is detected
    • After repeated driving cycles with the fault, the function is switched off permanently
    • Clearing the fault codes and starting a new driving cycle resets the output

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.