VOLVO
CEM-C112015 - Reversing lamp. General Electrical Failures. Circuit short to battery or open
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The central electronic module (CEM) monitors the voltage supply to the reversing lights. The code is set when the signal from the output is too high, which can be caused by poor contact, an open circuit in the signal wire or a short to voltage.
Mulige årsaker
- Poor contact, oxidation or play in the connections
- Open circuit in the signal wire
- The signal wire is shorted to voltage
Hva du kan gjøre
- 1Read and clear the code and check the reversing lights by engaging reverse
- 2Check that the reversing light bulbs are intact
- 3Check the reversing light fuse
- 4Use a multimeter to see whether the signal wire has voltage with the ignition off
- 5Look for loose or corroded connectors; have a workshop check the module output if the wiring is intact
Symptomer du kan merke1
- The reversing lights do not work
Hva feilen kan påvirke2
- After repeated driving cycles with the fault, the function is switched off permanently
- Clearing the fault codes resets the output
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.