VOLVO
CEM-C1A6086 - Tire pressure sensor. Bus Signal / Message Failures. Signal invalid
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The signal from a tire pressure sensor has become too weak, or it cannot be interpreted correctly. The code does not say which wheel is affected, and on these models the sensor positions cannot be determined. The fault may lie in any of the four sensors, in the remote receiver or in a sensor battery, so a diagnostic tool is needed to find which part it is.
Mulige årsaker
- Internal fault in a tire pressure sensor
- Internal fault in the remote keyless entry (RKE) receiver
- Low battery in a tire pressure sensor
Hva du kan gjøre
- 1Read out and note the fault code with a diagnostic tool, clear it and road test the car to see whether it returns
- 2Check that the remote control locks and unlocks the car. If the remote or receiver is not working, troubleshoot that first, since the tire signals are received through the receiver
- 3If you have a diagnostic tool: read the frozen data for the code, note which sensor ID was stored and compare it with the IDs of the four wheels
- 4If a sensor has been fitted recently, make sure it has been activated from transport mode. This needs special equipment, so have a workshop do it
- 5If the fault returns after you have found the right sensor, replace it and have a workshop activate the new one
Symptomer du kan merke1
- Yellow warning symbol and a message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.