VOLVO
CEM-C1A6293 - Tire pressure sensor. Component Failures. No operation
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
During the drive a tire pressure sensor has stopped transmitting, and the control module loses contact with it. Because the code does not say which wheel is involved, this has to be established with a diagnostic tool. The cause may be a damaged sensor or a remote receiver that is out of action.
Mulige årsaker
- Damaged tire pressure sensor
- The remote receiver is out of action
Hva du kan gjøre
- 1Read the fault code with a diagnostic tool, clear it and road test the car
- 2Test the remote control. If it does not lock or unlock the car, troubleshoot the receiver first
- 3Read the frozen values and note which ID number is stored, then compare it with the ID number of each wheel
- 4If a new sensor has been fitted, have a workshop activate it from transport mode, because a new sensor does not transmit until it is activated
- 5Replace the sensor that has stopped transmitting and have a workshop activate the new one
Symptomer du kan merke1
- A message in the information display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.