VOLVO
CEM-C1A9672 - Brake Switch. Mechanical Failures. Actuator stuck open
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The brake light switch at the pedal has stuck in a position where it does not register the brake being pressed. The control module therefore receives no signal of braking, even though brake pressure is present. The cause may be a switch that is incorrectly fitted, damaged or jammed.
Mulige årsaker
- The brake light switch has stuck in the open position
- The brake light switch is damaged
- The brake light switch is incorrectly fitted
Hva du kan gjøre
- 1Look at the brake light switch by the pedal: is it correctly seated, and does it move when the pedal is pressed?
- 2Ask someone to check whether the brake lights come on when you press the pedal. If they do not come on at all, that matches the fault
- 3Check that the fuses for the brake lights are intact, using the owner's manual
- 4Have a workshop correct or replace the switch if it is incorrectly fitted, damaged or jammed
- 5Brake lights are important for road safety, so get this fault fixed promptly
Symptomer du kan merke4
- The brake lights do not work
- Cruise control will not engage, does not hold speed or disengages
- The engine does not start, or the start function does not work
- Text message and warning symbol in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.