VOLVO
CEM-P060500 - Internal Control Module Read Only Memory (ROM) Error. General Failure Information. No sub type information
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The CEM has registered an internal fault in its software, for example after a failed software upload. The engine may then not start. The fault is normally put right with new software or by replacing the module, and that is done by a workshop.
Mulige årsaker
- Faulty software loaded in the CEM
Hva du kan gjøre
- 1Clear the fault code and start the car. If the fault returns straight away, it is an active software fault
- 2Tell the workshop if a software update was recently interrupted or failed, since that is an important clue
- 3Have a workshop read the fault codes and reload the CEM with the latest software. Programming is a workshop task
- 4If reprogramming has no effect, the CEM must be replaced, which is also a workshop task
- 5Make sure the battery is well charged during the upload, since low voltage can interrupt it
- 6After the work, check that the engine starts and that the fault code does not return
Symptomer du kan merke1
- The engine does not start
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.