VOLVO
CEM-P157173 - Brake Switch. Mechanical Failures. Actuator stuck closed
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
CEM checks the brake lamp diagnostic switch (BDS) at the brake pedal. If the switch is active even though the car is locked from outside, it has stuck in the closed position. The code is only stored after several lock and unlock cycles with the fault active, and it affects autostart and cruise control.
Mulige årsaker
- The brake switch (BDS) is installed incorrectly
- The brake switch (BDS) is damaged
- The brake switch (BDS) is stuck
Hva du kan gjøre
- 1Check that the pedal returns freely and that the switch does not stay in the pressed position
- 2Leave the car locked for a while and check whether the fault remains. The code is only stored after several lock and unlock cycles
- 3Check that the brake switch is correctly fitted at the pedal and not damaged
- 4With a diagnostic tool, read the brake switch status in live data while pressing and releasing the pedal
- 5Check that the brake lights go out when the pedal is released. If they stay on, the switch is probably out of position
- 6The brake switch affects the brake lights and cruise control. Have a workshop replace or adjust it as needed
Symptomer du kan merke3
- Autostart does not work
- Cruise control cannot be engaged
- The engine does not start, sometimes or always
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.