Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    CEM-P165312
    VOLVO

    CEM-P165312 - Power Steering Output Circuit. General Electrical Failures. Circuit short to battery

    System

    Sentral elektronikk (CEM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    7 modeller

    S60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (7)
    • Volvo S60 (2011–)2011–2015
    • Volvo S80 (2007–)2007–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2008–2015
    • Volvo XC60 (2009–)2009–2015
    • Volvo XC70 (2008–)2008–2015

    Hva betyr feilkoden?

    The CEM sends a frequency-modulated signal to the speed-dependent power steering module (HPAS), and the signal wire is shorted to supply voltage. The voltage then stays constantly high, and the speed-dependent power steering may stop regulating. The fault applies to the V60, S60 and similar models that have this system.

    Mulige årsaker

    • The signal wire to the HPAS module is shorted to supply voltage

    Hva du kan gjøre

    1. 1Start the engine and turn the steering wheel slowly from side to side. If it is stiff when the car is stationary, the fault is active
    2. 2Check the power steering module fuse in the engine bay relay and fuse box. If it has blown, check its circuit for a short to earth before replacing it
    3. 3Use a multimeter to check that the signal wire has no contact with supply voltage with the ignition on
    4. 4With a diagnostic tool, clear the fault codes and run a short test. If the fault returns straight away, it is active
    5. 5Steering is a safety function. Have a workshop repair the fault promptly rather than putting it off
    6. 6After the work, check that the steering wheel turns easily and that the fault code does not return

    Symptomer du kan merke1

    • The power steering assistance control does not work

    Hva feilen kan påvirke2

    • The function switches off during the driving cycle in which the fault is detected
    • After 100 driving cycles with the fault present, the function is switched off permanently

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.