VOLVO
CEM-P167400 - Control Module Software Corrupted. General Failure Information. No sub type information
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The CEM has registered a fault in its software. The code is generic and does not say more precisely what type of fault it is. The engine may then not start, and the gauges, instrument lighting and indicators can also be affected. A workshop fixes the fault with new software.
Mulige årsaker
- Software fault in the CEM
Hva du kan gjøre
- 1Clear the fault code and start the car. If the fault returns straight away, it is an active software fault
- 2Tell the workshop if a software update was recently interrupted or failed
- 3Have a workshop read the fault codes and reload the CEM with the latest software. Programming is a workshop task
- 4Make sure the battery is well charged during the reload, since low voltage can interrupt it
- 5After the reload, check that the engine starts and the gauges work
- 6If the fault remains after the reload, the CEM must be replaced, which is also a workshop task
Symptomer du kan merke5
- The engine does not start
- No gauges work
- The instrument lighting does not work
- The turn signals do not work
- Reduced performance
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.