VOLVO
CEM-U018100 - Lost Communication With Headlamp Leveling Control Module. General Failure Information. No sub type information
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The fault code means that the control module storing the fault has no working link to the headlamp control module (HCM), or the link is disturbed. The HCM drives the headlamps, so low beam and high beam may fail to work when the link breaks. The fault concerns communication and not one individual control module.
Mulige årsaker
- No voltage supply to the headlamp control module (HCM)
- Broken ground wire to the HCM
- Poor contact in the connections
- Open or shorted CAN wiring
- A module not intended for the car, such as a used unit with other software or hardware
Hva du kan gjøre
- 1Check that the fuse for the headlamp control module in the engine bay relay and fuse centre is intact
- 2Check the power wire for breaks and shorts to ground, and the connector for contact resistance, oxidation and looseness
- 3Check the ground wire for breaks or a short to voltage, and the ground point on the body
- 4If the fault returns, have a workshop check the CAN wiring. Replace the CEM only if testing shows it is damaged
Symptomer du kan merke3
- Low beam does not work
- High beam flash does not work
- High beam does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.