VOLVO
CEM-U020000 - Lost Communication With Passenger door module. General Failure Information. No sub type information
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The fault code means that the control module storing the fault has lost, or has disturbed, its link to the passenger door module (PDM). The passenger central locking button and switch panel may then stop working. Because the module runs in limited mode, the fault should be checked in good time.
Mulige årsaker
- Supply voltage to the passenger door module (PDM) is missing
- Broken ground wire to the module
- Contact resistance in the connections
- Open or shorted CAN wiring
- A module not intended for the car, such as a used unit with other software or hardware
Hva du kan gjøre
- 1With the ignition on, run the window lift. The window should open or close, which shows whether the module has power
- 2Look for the passenger door module fuse in the rear relay and fuse centre and confirm it is intact
- 3Check the connectors in the rear relay and fuse centre and at the module for loose contact and corrosion
- 4Check that the ground wire has no break or short to voltage
- 5If the fault returns, have a workshop check the CAN wiring. Replace the CEM only if testing has shown it is damaged
Symptomer du kan merke2
- The door cannot be operated from the central locking switch
- Passenger door switch panel does not work
Hva feilen kan påvirke1
- Limited function in the passenger door module (limp-home mode)
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.