VOLVO
CEM-U025700 - Lost Communication With Front Controls / Display Interface Module. General Failure Information. No sub type information
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
6 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (6)
Hva betyr feilkoden?
The fault code means that the control module storing the fault has no working link to the front display module (HLDF), or the link is disturbed. The front display may then fail to fold up or light. The fault may be intermittent, so the function should be checked again if it starts working.
Mulige årsaker
- No voltage feed to the front display module (HLDF)
- Broken ground wire to the HLDF
- Contact resistance in the connections
- Open or shorted CAN wiring
- A module not intended for the car, such as a used unit with other software or hardware
Hva du kan gjøre
- 1Turn on the navigation system. The display should fold up and its backlight should come on. If it does, power and CAN communication are fine and the fault is intermittent
- 2Check the fuse for the circuit
- 3Check the supply voltage and the body connection, and confirm the connectors are seated
- 4If the fault returns, have a workshop replace or check the front display module. Replace the CEM only if testing has shown it is damaged
Symptomer du kan merke1
- Front display does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.