VOLVO
CEM-U026400 - Lost Communication With Parking Assistance Camera. General Failure Information. No sub type information
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The fault code means that the control module storing the fault has no working link to the parking camera control module (PAC), or the link is disturbed. The parking camera then does not work. The fault concerns the network rather than one individual control module.
Mulige årsaker
- No voltage supply to the parking camera module (PAC)
- Broken ground wire to the PAC
- Poor contact in the connections
- Open or shorted CAN wiring
- A module not intended for the car, such as a used unit with other software or hardware
Hva du kan gjøre
- 1Check that the parking camera fuse is intact
- 2Check the cables and connections to the PAC for contact resistance or oxidation
- 3Check the power cable to the PAC for shorts and breaks
- 4Check the ground wire for breaks or a short to voltage, and the ground point for play and oxidation
Symptomer du kan merke1
- Park assist camera does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.