VOLVO
CEM-U040100 - Invalid Data Received From Engine control module. General Failure Information. No sub type information
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The fault code means that CEM receives information from the engine control module (ECM), but the quality of that signal is lower than CEM accepts. The cause lies in the ECM, and that is where fault-finding should take place. The adaptive cruise control may then stop working.
Mulige årsaker
- The cause of the fault lies in the engine control module (ECM)
Hva du kan gjøre
- 1Check that the fuses in the car are intact, and read in the handbook where they are located
- 2Test the relevant functions with buttons and controls or on a road test to see whether the fault shows
- 3With a diagnostic tool, read the engine module fault codes and note whether any are linked to this code
- 4Have a workshop fault-find the engine control module with diagnostic equipment. Replace it only when testing has shown it is faulty
Symptomer du kan merke1
- Adaptive cruise control does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.