VOLVO
CEM-U042386 - Invalid Data Received From Instrument Panel Control Module. Bus Signal / Message Failures. Signal invalid
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The fault code means that CEM receives a signal from the driver information module (DIM) that it judges to be of lower quality than it accepts. The fault lies in the DIM, and the start inhibitor may stop working. The function is switched off permanently if the fault is detected over 100 operating cycles.
Mulige årsaker
- Internal fault in the driver information module (DIM)
Hva du kan gjøre
- 1Check that the fuses are intact and look up their positions in the handbook
- 2Test the relevant functions with buttons, controls or a road test to see whether the fault shows
- 3With a diagnostic tool, read the fault codes and note whether the fault returns after a restart
- 4Have a workshop trace the instrument cluster with diagnostic equipment. Do not replace the CEM unless testing shows it is damaged
Symptomer du kan merke1
- Start inhibitor does not work
Hva feilen kan påvirke2
- The function is switched off permanently after 100 operating cycles in which the fault was detected
- Erasing the fault codes resets the function
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.