VOLVO
CEM-U042387 - Invalid Data Received From Instrument Panel Control Module. Bus Signal / Message Failures. Missing message
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The fault code means that CEM receives no messages from the driver information module (DIM) on the CAN network. The fault may be an open circuit in the CAN wiring or an internal fault in the DIM. The start inhibitor may then stop working, and the function is switched off permanently after 100 operating cycles in which the fault is detected.
Mulige årsaker
- Open circuit in the CAN wiring between the control module and CEM
- Internal fault in the driver information module (DIM)
- If several fault codes are stored in CEM for communication faults with other modules, there may be a common fault in the CAN network
Hva du kan gjøre
- 1Check that the fuses are intact and look up their positions in the handbook
- 2Test the relevant functions with buttons, controls or a road test to see whether the fault shows
- 3With a diagnostic tool, read the fault codes and check that communication with the instrument cluster works
- 4Have a workshop check the CAN wires and the instrument cluster with diagnostic equipment. Do not replace the CEM without need
Symptomer du kan merke1
- Start inhibitor does not work
Hva feilen kan påvirke2
- The function is switched off permanently after 100 operating cycles in which the fault was detected
- Erasing the fault codes resets the function
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.