Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    CEM-U201F87
    VOLVO

    CEM-U201F87 - External receiver. Bus Signal / Message Failures. Missing message

    System

    Sentral elektronikk (CEM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    9 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (9)
    • Volvo S60 (2011–)2011–2015
    • Volvo S80 (2007–)2007–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2008–2015
    • Volvo XC60 (2009–)2009–2015
    • Volvo XC70 (2008–)2008–2015

    Hva betyr feilkoden?

    The CEM hears nothing from the remote receiver (RRX) once the ignition comes on. The cause may be a cable break, a break in the power or earth supply to the receiver, or an internal fault in the receiver. The remote control will not work, and tyre pressure monitoring may stop functioning as well.

    Mulige årsaker

    • A break in the wire linking the CEM with the remote receiver module (RRX)
    • Open circuit in the power supply to the remote receiver module (RRX)
    • Open circuit in the earth cable to the remote receiver module (RRX)
    • Internal fault in the remote receiver module (RRX)

    Hva du kan gjøre

    1. 1Try locking and unlocking with several remote keys to rule out a faulty key
    2. 2If a low battery warning for the remote keys appears, replace the battery in the key
    3. 3Check that the connectors at the central electronic module (CEM) and the remote receiver (RRX) are secure and free from oxidation
    4. 4Follow the cable between the CEM and the remote receiver and check it is intact along its full length
    5. 5Check that the earth wire from the remote receiver to the body is intact
    6. 6Use a multimeter to confirm supply voltage at the remote receiver with the ignition on; if it is missing, have a workshop check the wiring

    Symptomer du kan merke4

    • The car cannot be operated with the remote control
    • Tyre pressure monitoring does not work at all and its warning comes on
    • A yellow warning symbol and a text message appear in the display
    • The tyre pressure warning lights up or behaves abnormally

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.