VOLVO
CEM-U300004 - Control Module. General Failure Information. System Internal Failures
System
Sentral elektronikk (CEM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The central electronic module (CEM) has found an internal fault in its own processes. The fault is caused by a software error in the module and is stored while the module has power. It can show up as a gauge reading incorrectly or not working as it should.
Mulige årsaker
- Software fault in the control module
Hva du kan gjøre
- 1Read and clear the code, then road test the car to see whether it comes back
- 2Has the car recently had new software or an update that was interrupted? Tell the workshop
- 3If several gauges show faults at the same time, have a workshop read the module software and download the latest software to the central electronic module (CEM)
Symptomer du kan merke1
- One of the gauges shows wrong readings or does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.