VOLVO
CPM-U300316 - Battery Voltage. General Electrical Failures. Circuit voltage below threshold
System
Forbrenningsvarmer (CPM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerV40 (2013–), V40 Cross Country (2013–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The heater control module has received too low a supply voltage for a period of time. The fault code is then set, and the heater cannot be started until the fault code has been erased. The cause may be a poorly charged battery, a connection with high resistance, or a blown fuse.
Mulige årsaker
- Poorly charged battery
- Contact resistance in the control module connections
- Blown fuse
Hva du kan gjøre
- 1With the ignition off, check that the fuse for the heater is intact. Replace it with a new one of the same rating if you suspect it is half-blown.
- 2Charge the battery fully and measure the battery voltage with a multimeter. A low voltage means the battery needs charging or replacing.
- 3Check the connectors to the heater control module for corrosion and looseness. Clean or tighten them.
- 4If you have a diagnostic tool: activate the heater after the work and check that it starts and works as it should.
- 5If the battery is good and the connectors are in order but the fault remains, have a workshop check the control module and its supply.
Symptomer du kan merke1
- The parking heater does not work
Hva feilen kan påvirke1
- The heater cannot be started until the fault code has been erased
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.