VOLVO
CRM-2063 - Position encoder 2, rear roof. Invalid position
System
Chassis (Bremser, styring, fjæring)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellC70 (2006–2013)
Vis modeller per årsmodell og motor (1)
Hva betyr feilkoden?
The convertible roof control module has registered that position sensor 2 in the rear roof section shows a position that does not match the expected one, or that the voltage to the sensor is outside the approved range. The sensor is then working poorly or is incorrectly fitted. The roof may be operated only in a limited way or not at all.
Mulige årsaker
- Position sensor not working
- Position sensor incorrectly fitted
Hva du kan gjøre
- 1With the ignition on, run the roof back and forth and see whether it moves evenly in both directions.
- 2Look for wear and signs that position sensor 2 is damaged.
- 3Check that position sensor 2 is correctly fitted and secure.
- 4If the sensor is damaged or incorrectly fitted and cannot be put right, have a workshop replace or correct it.
Symptomer du kan merke1
- No or limited roof operation
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.