VOLVO
CRM-6021 - Valve 2. Signal too high/signal too low
System
Chassis (Bremser, styring, fjæring)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellC70 (2006–2013)
Vis modeller per årsmodell og motor (1)
Hva betyr feilkoden?
The control signal to hydraulic valve 2 is outside normal range, either too high or too low. The fault can arise if the wire between the roof control module (CRM) and the valve has an open circuit or is shorted to ground or voltage, but also if the valve itself has stopped working. The roof movement may then be restricted.
Mulige årsaker
- Open circuit in the wire between the roof control module and hydraulic valve 2
- The wire between the roof control module and hydraulic valve 2 is shorted to ground or voltage
- Hydraulic valve 2 does not work and has an internal short to ground
- Internal fault in the roof control module (CRM)
Hva du kan gjøre
- 1Read out and clear the fault code, test the roof and see whether the fault comes back
- 2Check the wires to hydraulic valve 2, and not those of any other valve
- 3With a multimeter you can check whether the wire has an open circuit or a short to ground or voltage
- 4If the wire is faulty it should be replaced. If nothing is found, the hydraulic pump may need replacing by a workshop
- 5If the fault remains, a workshop needs to check the roof control module
Symptomer du kan merke2
- No or limited roof operation
- Message in the text display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.