VOLVO
DCDC-P060400 - Internal Control Module Random Access Memory (RAM) Error. General Failure Information. No sub type information
System
Ukjent system / Merkespesifikk
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The DC/DC converter control module has found an internal fault in its RAM memory, and the fault code is set when the module runs its memory check. The fault means the high voltage battery does not charge and forces hybrid mode. The fault is inside the control module itself.
Mulige årsaker
- The control module has an internal memory fault
Hva du kan gjøre
- 1Switch the ignition off, wait a moment, switch it on again, then see whether the fault code returns
- 2If the fault remains, a workshop should replace the DC/DC converter control module (DCDC)
- 3As DCDC is part of the high voltage system, it may only be replaced or worked on by trained staff in a workshop
Symptomer du kan merke3
- Text message and warning symbol in the display
- The high voltage battery does not charge while driving
- The PURE, SAVE and AWD drive modes disengage automatically or are not available
Hva feilen kan påvirke2
- The high voltage battery does not charge
- Hybrid driving mode is forced
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.