VOLVO
DCDC-P060500 - Internal Control Module Read Only Memory (ROM) Error. General Failure Information. No sub type information
System
Ukjent system / Merkespesifikk
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The DC/DC converter control module has found an internal fault in its ROM memory, which holds the fixed program instructions. The fault code is set during the module's memory check. The high voltage battery does not charge, and hybrid mode is forced.
Mulige årsaker
- The control module has an internal memory fault
Hva du kan gjøre
- 1Switch the ignition off and then on again, and see whether the fault code comes back
- 2If the fault remains, a workshop needs to replace the DC/DC converter control module (DCDC)
- 3As DCDC is part of the high voltage system, work on it may only be carried out by trained staff in a workshop
Symptomer du kan merke3
- Text message and warning symbol in the display
- The high voltage battery does not charge while driving
- The PURE, SAVE and AWD drive modes disengage automatically or are not available
Hva feilen kan påvirke2
- The high voltage battery does not charge
- Hybrid driving mode is forced
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.