VOLVO
DCDC-P060B00 - Internal Control Module A/D Processing Performance. General Failure Information. No sub type information
System
Ukjent system / Merkespesifikk
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
An internal A/D converter in the DC/DC converter control module has failed its own test. A/D converters turn measured signals into values the control module can use. The fault therefore lies in the control module, the high voltage battery does not charge, and hybrid mode is forced.
Mulige årsaker
- Internal fault in the control module
Hva du kan gjøre
- 1Switch the ignition off and then on again, and see whether the fault code comes back
- 2If the fault remains, a workshop should replace the DC/DC converter control module (DCDC)
- 3As DCDC is part of the high voltage system, work on it may only be carried out by trained staff in a workshop
Symptomer du kan merke3
- Text message and warning symbol in the display
- The high voltage battery does not charge while driving
- Hybrid mode is used often or all the time
Hva feilen kan påvirke2
- The high voltage battery does not charge
- Hybrid driving mode is forced
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.