VOLVO
DCDC-P0A1017 - DC/DC Converter Status Circuit High. General Electrical Failures. Circuit voltage above threshold
System
Ukjent system / Merkespesifikk
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The DC/DC converter control module has registered that the status circuit is high and that the voltage in the circuit is too high. This can be caused by a short circuit in the connections, or by a damaged high voltage battery. Because the converter is part of the high voltage system, charging of the high voltage battery is affected.
Mulige årsaker
- Short circuit in the connections
- Damaged high voltage battery
Hva du kan gjøre
- 1Switch the ignition off, wait a moment and switch it on again, then see whether the code returns
- 2Have a workshop check the high voltage battery wiring for loose contacts and damage, and the connections to the converter
- 3Have a workshop check the condition of the high voltage battery, since a damaged battery can cause this code
- 4The high voltage system may only be handled by qualified personnel. Do not work on the battery, the converter or their wiring yourself
Symptomer du kan merke4
- Warning symbol and message in the display
- Charging of the high voltage battery is absent or reduced while driving
- The high voltage battery discharges or charges poorly
- Drive modes PURE, SAVE and AWD disengage automatically or cannot be selected
Hva feilen kan påvirke2
- No charging of the high voltage battery
- Hybrid drive mode is forced
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.