VOLVO
DCDC-P0A9400 - DC/DC Converter Performance. General Failure Information. No sub type information
System
Ukjent system / Merkespesifikk
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The DC/DC converter module in the plug-in hybrid has detected too many critical faults in its circuit, or a configuration fault. The DC/DC converter takes energy from the high-voltage battery and converts it for the car's ordinary 12-volt system.
Mulige årsaker
- Internal fault in the DC/DC converter module
- Incorrect configuration or software after earlier work on the car
Hva du kan gjøre
- 1Switch the ignition off, wait a moment and switch it on again to see whether the fault remains
- 2Check that the 12-volt battery is charged and in good condition
- 3If the fault remains, the converter module needs checking and most likely replacing
- 4Never work on the high-voltage system yourself – it must only be handled by qualified personnel
Symptomer du kan merke4
- Warning message in the display
- The high-voltage battery does not charge, or charges poorly
- Pure electric and other drive modes may be unavailable
- The combustion engine runs more often or all the time
Hva feilen kan påvirke2
- The high-voltage battery is not charged
- The car is forced into hybrid mode
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.