VOLVO
DDM-0021 - Control, door mirror. Stuck in the active position
System
Førerdør (DDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerC70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (3)
Hva betyr feilkoden?
The driver's door control module has registered that the signal from the mirror adjustment control is too low, so it is not receiving the right input from the control. The cause is a signal wire shorted to ground. The door mirror then cannot be adjusted.
Mulige årsaker
- Signal wire shorted to ground
Hva du kan gjøre
- 1Use a multimeter to check that the signal wire from the mirror control has no contact with ground (the body), including when the door is opened and closed
- 2Clear the code with your own tool and see whether it returns once the mirror has been used again
- 3If a short to ground is found, have a workshop repair the wire
- 4If no short is found, the mirror control panel needs replacing
Symptomer du kan merke1
- The door mirror cannot be adjusted
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.