VOLVO
DDM-0023 - Control, door mirror selector. Stuck in the active position
System
Førerdør (DDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerC70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (3)
Hva betyr feilkoden?
A reading from one of the two mirror selector switches is registered as too low. The cause is a signal wire shorted to ground. The mirror adjustment control then does not work.
Mulige årsaker
- Signal wire shorted to ground
Hva du kan gjøre
- 1Clear the code with your own tool and see whether it returns after you have used the mirror control
- 2Use a multimeter to check that the signal wire from the mirror selector buttons has no contact with ground (the body), including when the door is opened and closed
- 3If a short to ground is found, a workshop should repair the wire
- 4If no short is found, the control panel needs replacing
Symptomer du kan merke1
- The mirror adjustment control does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.