VOLVO
DDM-0027 - LED, camera module Open circuit
System
Førerdør (DDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Hva betyr feilkoden?
The driver's door control module has registered a break in the supply wire to the LED in the camera module of the driver's side door mirror. The LED may also be without a connection, in which case it will not light. A message may appear in the text display.
Mulige årsaker
- Break in the supply wire
- LED not connected
Hva du kan gjøre
- 1Start the engine and check whether the LED flashes three times when the BLIS system is activated
- 2Switch the ignition off, then check that the LED is properly connected and intact
- 3Have a workshop check the supply wire for breaks, contact resistance and oxidation
- 4If the fault does not return, no further action is needed, as it was most likely intermittent
Symptomer du kan merke2
- The LED does not light
- Message in the text display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.