VOLVO
DDM-003A - Camera module voltage supply Signal too high
System
Førerdør (DDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Hva betyr feilkoden?
The driver's door control module has registered that the signal on the supply wire to the camera in the driver's side door mirror is too high. The wire is shorted to voltage, so the LED does not light. A message may appear in the text display.
Mulige årsaker
- Supply wire to the camera shorted to voltage
Hva du kan gjøre
- 1Start the engine and check whether the LED flashes three times when the BLIS system is activated
- 2Use a multimeter to check that the camera's supply wire has no contact with voltage while the ignition is off
- 3If a short is found, the wire needs repairing, which a workshop should do
- 4If the code does not return, no further action is needed, as the fault was most likely intermittent
Symptomer du kan merke2
- The LED does not light
- Message in the text display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.