VOLVO
DDM-0049 - Control module. Internal fault
System
Førerdør (DDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Hva betyr feilkoden?
The door module has flagged an internal fault, since a signal was not refreshed within a set time. The control module then goes into its limp-home mode, and the power window and door mirror control do not work.
Mulige årsaker
- Internal fault in the door module
Hva du kan gjøre
- 1Read out and note the fault code, clear it, then run a test drive to see if it returns
- 2Bring the window to its upper limit by hand and start an initialization. From model year 2003 the window only lowers a short way before rising
- 3After initialization, check that the window raises and lowers normally with the switch
- 4If the fault remains, have a workshop replace the door module. A new module is delivered without software and must be programmed
Symptomer du kan merke2
- The power window mechanism does not operate
- Door mirror control does not function
Hva feilen kan påvirke1
- The control module's limp-home program has started
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.