VOLVO
DDM-B108F23 - Cabin Lock/Unlock Switch. General Signal Failures. Signal stuck low
System
Førerdør (DDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The door module monitors the central lock button in the cabin. The fault is stored when the button has stayed pressed for a long time, because the signal then stays low. Central locking then does not work at all.
Mulige årsaker
- The central lock button has jammed in the pressed position
- Damaged control panel
Hva du kan gjøre
- 1Read out and note the fault code, clear it, then press the central lock button once to see if it returns to its position
- 2Check that the button is not stuck in the pressed position and that it moves freely when pressed and released
- 3If you have a diagnostic tool, check in live data whether the central lock button signal shows as pressed when the button is released
- 4If the button is stuck or broken, have a workshop replace the control panel
Symptomer du kan merke1
- Central locking does not operate at all
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.