VOLVO
DDM-B10EB15 - Driver door double locking motor. General Electrical Failures. Circuit short to battery or open
System
Førerdør (DDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The door module powers the lock motor for the blocked lock position in the driver's door, and the output signal is too high. This can be caused by the supply cable being short-circuited to voltage or having an open circuit. The code can sometimes be set by a fault that must first be traced using other fault codes.
Mulige årsaker
- Supply cable short-circuited to voltage
- Open circuit in the supply cable
- Poor contact, oxidation or contact resistance at the connectors
Hva du kan gjøre
- 1Check that the fuses are intact. Fuse positions are usually shown on the cover of the fuse box
- 2Read out the fault codes in the module and trace any other codes first, especially for mirror folding and the shared central lock motor
- 3With ignition off, use a multimeter to check the supply cable is not broken and has no contact with plus. Replace the cable if it is damaged
- 4Check the connectors in the driver's door for contact resistance, oxidation and loose contacts
- 5If the fault remains, have a workshop check the control module
Symptomer du kan merke4
- Does not lock to the deadlock position
- Central locking does not work
- Door mirror folding does not work
- Electric door mirror adjustment does not work
Hva feilen kan påvirke1
- Mirror folding and power adjustment are blocked to prevent the car from being locked by accident
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.