VOLVO
DDM-B118C13 - Left blind spot warning indicator. General Electrical Failures. Circuit open
System
Førerdør (DDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The left front door module exchanges data with the left camera module (LCM) over the LIN bus. The fault is stored when there is an open circuit in the supply cable to the LED. The LED in the warning indicator then does not light, and a message may appear in the information display.
Mulige årsaker
- Open circuit in the supply cable to the LED
Hva du kan gjøre
- 1Read out and note the fault code, clear it, then test drive the car to see if it returns
- 2With ignition off, use a multimeter to check that the LED cable is not broken. Replace the cable if it has an open circuit
- 3Check the connectors in the warning indicator for contact resistance and loose contact
- 4If the fault remains, have a workshop check the control module in the left front door
Symptomer du kan merke2
- LED does not light
- A message appears in the information display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.