VOLVO
DDM-B11B811 - Driver Blind Spot Warning Indicator Supply. General Electrical Failures. Circuit short to ground
System
Førerdør (DDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
On cars with the blind spot information system (BLIS) a camera is fitted in each external mirror, and the driver door module powers the driver-side camera. The fault is stored when the output signal is too low, because the supply cable is short-circuited to ground. The LED then does not light, and a message may appear in the display.
Mulige årsaker
- Supply cable short-circuited to ground
Hva du kan gjøre
- 1Read out and note the fault code, clear it, then test drive the car to see if it returns
- 2With ignition off, use a multimeter to confirm the supply cable to the driver-side camera has no contact with ground (body). Replace the cable if it is damaged
- 3Check the connectors in the driver's side mirror for moisture and oxidation, and clean them
- 4If you have a diagnostic tool, activate the blind spot system on the driver's side and check whether the camera responds
- 5If no fault is found, have a workshop check the camera in the driver's side mirror
Symptomer du kan merke2
- LED does not light
- A message appears in the information display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.