VOLVO
DDM-B11BF23 - Mirror Fold Switch. General Signal Failures. Signal stuck low
System
Førerdør (DDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerV40 (2013–), V40 Cross Country (2013–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The door module supplies the motor for the electrically foldable mirror on the driver's side. The fault is stored when the output current is too low during folding or unfolding, and the left and right mirror buttons have been held down for a long time. Mirror folding and power adjustment then do not work.
Mulige årsaker
- Supply cable short-circuited to voltage
- Open circuit in the supply cable
- Poor contact, oxidation or contact resistance at the connectors
Hva du kan gjøre
- 1Check that the left and right mirror buttons are not stuck in the pressed position
- 2Test the mirror functions with the buttons and controls and note what does not work
- 3Read out the fault codes in the module and trace the other codes stored there first
- 4With ignition off, use a multimeter to check that the supply cable to the mirror motor is not broken and has no contact with voltage. Replace the cable if it is damaged
- 5If the fault remains, have a workshop check the mirror switch and the door module
Symptomer du kan merke3
- Central locking does not work
- Electric door mirror adjustment does not work
- Door mirror folding does not work
Hva feilen kan påvirke1
- Mirror folding and power adjustment are blocked to prevent the car from being locked by accident
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.