VOLVO
DDM-B12BA11 - Lock Status LED - Front. General Electrical Failures. Circuit short to ground
System
Førerdør (DDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
Vis modeller per årsmodell og motor (5)
Hva betyr feilkoden?
The door module controls the lamp in the central locking button that shows whether the car is locked or unlocked. The fault is stored when the current to the lamp is too high, which means the supply wire has contact with ground. The module then stops supplying the lamp, so the lock status is no longer shown on the button.
Mulige årsaker
- The supply wire is short-circuited to ground
- Moisture or oxidation in the connections
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Check whether the lamp in the front door central locking button lights up when the car is locked and unlocked
- 3Check the connector to the button in the door for moisture, oxidation and chafing on the cable
- 4Use a multimeter to check that the wire to the lamp has no contact with ground
- 5Read and clear the code, and check whether it returns
- 6If the fault remains, have a workshop with diagnostic equipment check the door module and the button
Symptomer du kan merke1
- The indicator lamp in the central locking button does not work
Hva feilen kan påvirke1
- The control module stops supplying the lamp in the lock button
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.