VOLVO
DDM-B12DA11 - Blind Spot Warning Indicator. General Electrical Failures. Circuit short to ground
System
Førerdør (DDM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
Vis modeller per årsmodell og motor (5)
Hva betyr feilkoden?
The driver door module monitors the supply to the LED in the mirror that signals when something is in the blind zone beside the car. The fault is stored when the wire to the LED is short-circuited to ground. The supply to the LED is then switched off and the warning does not work.
Mulige årsaker
- The supply wire to the LED is short-circuited to ground
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Check whether the warning lamp in the mirror lights when a vehicle passes through the blind spot
- 3Inspect the cable from the door to the mirror for chafing and pinching
- 4Use a multimeter to check that the wire to the LED has no contact with ground
- 5Read and clear the code and road test to see whether it returns
- 6If the fault remains, have a workshop with diagnostic equipment check the control module and the mirror
Symptomer du kan merke3
- The LED in the mirror does not light up
- A message is shown in the text display
- The blind spot warning lamp lights up or behaves abnormally
Hva feilen kan påvirke1
- The warning for objects in the blind spot does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.